Key Benefits
- 3kW fibre laser — tolerances to ±0.1mm
- Cuts MS, SS, aluminium and GI steel in one setup
- Large 10×5 ft bed — no joins on large panels
- 100W CO2 laser for acrylic, MDF, wood, fabric
- Diode laser for engraving and thin non-metals
- No tooling cost — direct from DXF/DWG file
- Min order 1 piece — R&D to production
- DRDO registered · BDL registered · GeM listed
3kW Metal Laser Cutting Services in Hyderabad
iMake operates a 3kW fibre laser cutter with a 10 ft × 5 ft (3050 × 1525 mm) cutting bed — one of the most powerful laser cutting setups available from an MSME manufacturer in Hyderabad. Based at our 7000 sq ft facility at Hardware Park Phase 2, we cut mild steel, stainless steel, aluminium and galvanised steel for defence, aerospace, data centre, automotive and industrial clients. We also run a 100W CO2 laser for acrylic, MDF, wood and fabric, and a diode laser for precision engraving and thin non-metal cutting. As a DRDO registered, BDL (Bharat Dynamics Limited) registered and GeM listed manufacturer, we serve clients across Hyderabad, Telangana and Andhra Pradesh with same-day quotes and complete quality documentation.
Three Lasers, Every Material — Under One Roof
Most laser cutting vendors in Hyderabad offer a single machine and a limited material range. iMake runs three complementary laser systems from one facility, covering metals, non-metals and engraving in a single purchase order:
3kW Fibre Laser — our primary production machine for sheet metal. Cuts mild steel up to 10mm, stainless steel up to 8mm, aluminium up to 6mm and galvanised steel (GI) up to 2.5mm on a 10×5 ft bed. Clean, oxide-free edges suitable for welding, powder coating and anodising. This is the machine that serves defence orders, data centre cable tray fabrication and aerospace bracket production.
100W CO2 Laser — dedicated to non-metal cutting. Handles acrylic (PMMA) up to 20mm, MDF, plywood, polycarbonate, fabric, leather and paper. Ideal for signage, architectural models, packaging prototypes, display fixtures and corporate gifting. Faster and cleaner than manual routing for complex profiles.
Diode Laser — for precision engraving on wood, leather, anodised aluminium, acrylic and paper, and for cutting thin non-metals. Used for branding, serial number marking, personalised items and decorative detail work where the CO2 laser would be overkill.
Custom Laser Cutting for Hyderabad Businesses
Our engineering team reviews every DXF or DWG file for Design for Manufacturability (DFM) before cutting — identifying potential issues with thin features, hole-to-edge distances and nesting to minimise material waste and ensure first-time accuracy. We work directly from your CAD file, with no manual re-drawing and no hidden set-up costs. Local Hyderabad clients can collect finished parts the same day from Hardware Park Phase 2.
Metals We Cut — 3kW Fibre Laser
We cut mild steel (MS) up to 10mm, stainless steel (SS 304 and SS 316) up to 8mm, aluminium (6061, 5052, 5754) up to 6mm, and galvanised steel (GI) up to 2.5mm. The 3kW power means faster cutting speeds, cleaner edges on thicker material and the ability to handle galvanised coatings without burning — a capability most 1.5kW machines in Hyderabad cannot offer. All metal cutting delivers oxide-free edges suitable for welding, powder coating and anodising.
Non-Metals — 100W CO2 Laser and Diode Laser
Our 100W CO2 laser cuts acrylic (PMMA) up to 20mm, MDF and plywood up to 18mm, polycarbonate, fabric, leather and paper — with clean edges that require no sanding or finishing. The diode laser handles precision engraving on wood, leather, anodised aluminium, acrylic and paper, plus cutting of thin non-metals up to 3mm. Together these two machines cover signage, architectural scale models, packaging prototypes, display fixtures, corporate gifting, personalised items and branding applications — all from the same facility as our metal cutting.
Fast Turnaround — 2 to 5 Working Days
Standard turnaround for metal laser cutting is 2–5 working days from drawing approval. Rush orders can be accommodated in 24–48 hours depending on machine availability — WhatsApp us at +91-94942-69431 to check the current slot. CO2 laser and diode laser jobs typically turn around faster — often same-day or next-day for standard materials. Hyderabad clients can collect directly from our Hardware Park Phase 2 facility.
No Minimum Order Quantity
Our minimum order quantity is 1 piece across all three lasers — fibre, CO2 and diode. Whether you need a single prototype bracket in galvanised steel, a batch of 500 identical enclosure panels in mild steel, 20 acrylic display stands, or one engraved wooden award, we apply the same quality standards and DFM rigour to every order. This makes our laser cutting accessible for R&D teams, defence labs, startups, architects, events companies and production engineers alike.
Laser cutting in Hyderabad — three machines, complete material coverage
iMake operates three laser systems at Hardware Park Phase 2, Hyderabad — a 3kW fibre laser for metals, a 100W CO2 laser for non-metals, and a diode laser for engraving and thin-material work. If you are searching for reliable laser cutting near me in Hyderabad, we offer same-day quotes across all three machines, with local collection from Hardware Park Phase 2.
3kW Fibre Laser — Metal Cutting Capacity
| Material | Max thickness | Typical applications |
|---|---|---|
| Mild steel (MS) | Up to 10mm | Brackets, enclosures, structural panels, chassis |
| Stainless steel (SS 304 / 316) | Up to 8mm | Defence panels, medical fixtures, food equipment |
| Aluminium (6061, 5052, 5754) | Up to 6mm | Aerospace brackets, heat sinks, lightweight frames |
| Galvanised steel (GI) | Up to 2.5mm | Cable trays, rack enclosures, ventilation panels, data centre infrastructure |
100W CO2 Laser — Non-Metal Cutting
| Material | Max thickness | Typical applications |
|---|---|---|
| Acrylic (PMMA) | Up to 20mm | Signage, display stands, awards, enclosure windows |
| MDF / Plywood | Up to 18mm | Architectural models, furniture parts, jigs, packaging |
| Polycarbonate | Up to 8mm | Machine guards, protective panels, lenses |
| Fabric / Leather / Paper | Varies | Patterns, templates, branded packaging, bespoke items |
Diode Laser — Engraving and Thin-Material Cutting
| Capability | Materials | Typical applications |
|---|---|---|
| Engraving | Wood, leather, anodised aluminium, acrylic, paper | Serial numbers, logos, personalised gifts, branding |
| Thin-material cutting | Paper, card, thin wood (up to 3mm), thin acrylic | Stencils, craft pieces, packaging inserts, decorative elements |
Why choose iMake for laser cutting in Hyderabad?
- 3kW fibre laser — faster speeds, cleaner edges and GI steel capability that most Hyderabad shops cannot match
- Three laser systems under one roof — metal, non-metal and engraving in a single purchase order
- DRDO registered and BDL registered — full quality documentation and traceability for defence procurement
- GeM listed — government departments and defence PSUs can order directly through the GeM portal
- Located at Hardware Park Phase 2 — serving DRDO labs, BEL, BDL, HAL supply chain, Fab City and data centre contractors
- 10-person CAD team for DXF file preparation, nesting, and design optimisation at no extra charge
- Same-day quotes via WhatsApp — send your DXF or drawing to +91-94942-69431
- Tolerances to ±0.1mm — suitable for defence, aerospace and precision industrial applications
- Serving all areas of Hyderabad including Balanagar, Jeedimetla, Uppal, Cherlapally, Patancheru and the ORR industrial belt
3kW
Fibre laser — metals including GI steel
100W
CO2 laser — acrylic, MDF, fabric
10×5 ft
Cutting bed — largest from a Hyderabad MSME
1 piece
Minimum order — R&D to production
Get a same-day quote: Send your DXF file, PDF drawing, or even a sketch to WhatsApp +91-94942-69431. Mention material, thickness, and quantity. Our team will respond within a few hours with a price and lead time — for metal, acrylic, wood or engraving jobs.
Some of our recent laser cutting work
SS Laser Cut — Defence Batch
Precision stainless steel parts cut on our 3kW fibre laser for a defence assembly application. Clean edges, tight hole tolerances, ready for welding — supplied with material certificate.
SS Mounting Bracket
Complex stainless steel mounting bracket with multiple precision bores — cut in a single setup on our 10×5 ft laser bed. 3kW power delivers cleaner edges on 6mm SS than lower-power machines.
SS Batch — Aerospace Application
High-volume batch of identical stainless steel components for an aerospace client — consistent dimensional accuracy across every piece, supplied with full quality documentation.
Acrylic — CO2 Laser Cut & Engraved
Custom acrylic panel with laser-engraved logo cut on our 100W CO2 laser — polished edges and sharp engraving detail for a product display application.
F.A.Q
Frequently Asked Questions
-
What metals can you laser cut in Hyderabad, and up to what thickness?
Our 3kW fibre laser cuts mild steel (MS) up to 10mm, stainless steel (SS 304 and SS 316) up to 8mm, aluminium (6061, 5052, 5754) up to 6mm, and galvanised steel (GI) up to 2.5mm on a 10×5 ft bed at Hardware Park Phase 2, Hyderabad. The 3kW power delivers faster speeds and cleaner edges on thick material compared to the 1.5kW machines common in Hyderabad.
-
Do you also cut non-metals like acrylic, wood and fabric?
Yes. Our 100W CO2 laser cuts acrylic (PMMA) up to 20mm, MDF and plywood up to 18mm, polycarbonate, fabric, leather and paper. We also have a diode laser for precision engraving on wood, leather, anodised aluminium, acrylic and paper, plus cutting of thin non-metals up to 3mm. All three lasers operate from the same facility — you can order metal and non-metal cutting in a single purchase order.
-
Are you DRDO registered, BDL registered and GeM listed?
Yes. iMake is a DRDO registered vendor, BDL (Bharat Dynamics Limited) registered vendor, and is listed on the GeM portal under metal laser cutting and sheet metal fabrication categories. Government departments, defence PSUs and DRDO labs can place orders directly through GeM. We provide GST invoices, material certificates, and quality documentation as required by defence procurement procedures.
-
What is the minimum order quantity and turnaround time?
Minimum order quantity is 1 piece across all three lasers — suitable for prototyping, R&D and small batch requirements. Standard turnaround for metal cutting is 2–5 working days. CO2 laser and diode laser jobs often turn around same-day or next-day. Rush orders in 24–48 hours are possible — WhatsApp +91-94942-69431 to confirm. Hyderabad clients can collect directly from Hardware Park Phase 2.
-
What file formats do you accept for laser cutting?
We prefer DXF or DWG files for laser cutting as these give the most accurate results. We also accept STEP, STP, IGES, PDF drawings and SLDPRT. For engraving on the diode laser, we accept AI, SVG, PNG and JPEG files. If you only have a 2D sketch or a PDF, our CAD team can convert it to a production-ready DXF at no extra charge. Always specify material, thickness and quantity when sending files.
-
What post-processing services do you offer after laser cutting?
All metal laser cut parts are deburred as standard. We also offer powder coating, anodising (for aluminium), laser engraving (on our diode laser), and bending through our partner network. We can supply complete sheet metal assemblies — cut, bent, finished and ready to install — as a single purchase order.
-
Can you cut galvanised steel for data centre applications?
Yes. Our 3kW fibre laser cuts galvanised steel (GI) up to 2.5mm — suitable for cable trays, rack enclosures, ventilation panels and other data centre infrastructure components. The 3kW power handles the galvanised coating cleanly without excessive burning or zinc fume issues that lower-power machines struggle with. We have completed data centre fabrication orders and can supply with full quality documentation.
-
What are the accepted payment methods?
We accept NEFT / RTGS bank transfer, UPI, and cheque. For government and defence clients, purchase order (PO) based invoicing with net-30 payment terms is available. For first-time clients, 50% advance is standard. GST invoices are provided for all orders. GeM portal payments are also accepted.